With a constant change in the needs of consumer demand, manufacturers are developing technologies for the manufacture of building materials. Including laminated plastic panels are made on the latest European equipment.
Manufacturers produce seamless laminated plastic panels
panels on which the pattern is applied using offset printing technology. The structure of the products is made of Taiwanese resin with the introduction of high quality compounds.
Panel structure and application.
The latest production technologies do not allow the creation of micropores in the panel structure. Such products are completely protected from the reproduction of all types of microorganisms. It is also easy to sanitize them without changing their appearance. This increases the life of laminated panels.
The created structure greatly increases the resistance:
– high temperatures, because of this, the fire safety category increases;
– ultraviolet radiation, this prevents the pattern from fading;
– moisture ingress, can be installed in damp rooms, mounted on the facades of buildings;
– mechanical influences.
A large variety of colors and created surface patterns allows you to veneer surfaces in any design. Quality and low prices for plastic panels attract buyers. They are widely used in the renovation of apartments and private houses. Also, with a high variety of drawings, they are used by construction companies in new construction.
Cladding works.
Facing work of surfaces can be performed by a person who does not have much professional experience. Surface cladding is carried out according to the prepared frame design.
The frame is mounted from wooden slats or special plastic molding guides. Fastening to the frame is made on stapler staples or special clips. Panel cladding is carried out by snapping the groove into the comb. Therefore, the production of work does not take much time and physical costs.
For installation, a small set of tools is used:
– file with a blade for metal;
– stapler and a set of staples;
– two meter level;
– wood saw;
– a hammer;
– electric drill, for drilling holes when mounting the frame.
Materials:
– wooden lath 25×50 mm;
– plastic dowels 50×8 mm;
– self-tapping screws 65×4.5 mm.
When finishing surfaces, all engineering networks that are installed in the premises are closed. The buyer can always choose the panels at his discretion. After completion of the work, the room will look beautiful and delight the eye.
