When applying paint to the ceiling, you can not do without plastering and puttying. How to do it right?
A special plaster composition is best used if various cracks and chips are visible on the ceiling. The most convenient for work compositions based on gypsum. To prepare such a solution yourself, you will need water, a plaster composition, a construction mixer and a suitable container. We spread the plaster composition in our container, add water there, then mix everything until a homogeneous mass.
We first apply the solution we received with a small spatula to the surface, and then level it with a large spatula. Do not lay out the solution with thick layers, otherwise the plaster can simply take and fall off. Leave a few hours between coats. Having finished with this, you can start puttying.
Putty is necessary to make our ceiling as smooth as possible. Usually it is recommended to breed putty on your own, and not to buy a completely finished material. Putty is being prepared almost according to the same principle as the plaster mixture. The putty is allowed to stand for a few minutes, then mixed again.
The finished mixture is applied to a spatula about 60-80 centimeters wide and applied to the ceiling. You should start from the wall adjacent to the window and move deeper into the room. The layers should overlap, the thickness of one layer should not exceed two millimeters. In general, the thickness of the putty should not exceed five millimeters. After drying, the putty should be treated with sandpaper.
You have long wanted to change the interior and buy a kitchen? Only we can provide you exactly what you need. The best kitchens on the site / cheap. Kitchens in Rostov can be easily ordered in our online store and we will bring them to you in the best possible way.
